The Band Hopper 4, four-band portable dipole antenna system
At a glance:
Weight 585 g, 21 oz.
Power rating 125 Watts
ATU needed? No. Connects direct to your radio
Balun included? Yes
SSB, CW, data? Yes. Fine for all modes
How long is this antenna? About 48 metres end to end.
***IMPORTANT NOTE: if you are using a Band Hopper with our 10m Compact Travel Mast, attach the antenna with a cable tie to the top of section 11 (counted from the bottom). This is about 20ft up and is the perfect height for the antenna centre. Any higher and the antenna may not work properly and your Compact Travel Mast could be damaged.***
What do you get?
Band Hoppers are a complete system including:
- A resonant multi-band dipole antenna with Perspex link hardware
- A 10m feeder - high quality RG174 terminated in a BNC plug
- Built-in balun
- A guying system for a lightweight telescopic pole (6 - 8 metres length recommended)
- Three Wire Winders to ensure tangle-free operating
- Three lightweight aluminium alloy pegs
- A detailed set of instructions
- A nylon carry bag with attachment clip
- Our famous back-up for any questions that you have.
Band Hoppers work out of the packet - no messing, just fun!
Is this the right antenna for YOU? Click here for help.
Also available from our international agent(s):
Designed to compliment modern miniature HF transceivers such as the Youkits HB1B or the Elecraft KX1, the Band Hopper IV covers 20, 30, 40 and 80 metres (3.5 - 3.7MHz 1.5:1 VSWR bandwidth using our "Hopper Jump" system) in one neat package. Using all our innovative techniques and laser-cut hardware, the Band Hopper IV works straight out of the packet on all your favourite portable band. Full sized dipoles on each band means no-compromise performance. Not sure what a linked dipole is? Click here.
The Band Hopper IV covers four HF bands with a high efficiency full-size halfwave dipole on each band. It's not a compromise loaded antenna. It's also designed to allow you to get the feedpoint high - that's important for good performance. Band selection is by easy-to-use jumpers; quick to change!
Using the Band Hopper IV could not be easier. The custom designed centrepiece fits on an tapered pole (such as our famous SOTA pole). It slides down to the optimum height (usually the junction between the top and second sections of the mast).If you don't have a tapering mast dont worry, the centrepiece has slots for cable ties too so you can attach it to most anything. Don't like masts? The centrepiece has an attachment point for a throwing line to use in the forest.
Unrolling the dipole elements is a breeze using the Wirewinders supplied. When you unroll the elements you will notice that the Wirewinders are attached to 4m (13ft) nylon braided extension cords. This not only means that you cannot lose them but also that in rocky areas you can guy your pole by putting the Wirewinder in a crack in the rocks or just by putting it under a rock. The Wirewinders also make great snow anchors too so guying your pole in the snow has never been easier! We also provide pegging loops for use with our high quality pegs (included).
The feeder is a 10m length of RG174 preterminated in a BNC plug. This is wound on a third Wirewinder. Also on the third Winder is a 10m back guy for your mast. No need for any additional guys and the two dipole elements plus the back guy are all you need for a stable and robust system. The back guy is attached to the Wirewinder to give you the flexible guying options above. Just a mast or use a nearby terr to support the centre of your antenna and you're good to go!
This Band Hopper IV is super light too! The whole package consisting of the antenna, the Wirewinders and the back guy weighs in at less than 475g; that's under 17oz!
No need to adjust the Band Hopper IV, it is supplied pre-tuned. We do the tricky stuff leaving you to have the fun. This is a fully assembled product that works out of the packet.
Each Band Hopper IV is supplied in a stylish carry bag complete with lightweight aluminium pegs.
The Band Hopper IV is a truly amazing package for a bargain price.
The Band Hopper IV is suppled with a high performance ferrite-core balun; not just a few turns of co-axial cable!
30 Reviews Hide Reviews Show Reviews
took it to Ibiza to do portable work, performed well, easy to set up.
5 stars if it had some quick disconnects for the wire elements at the feed point.
Just wanted to drop you a line to say how delighted I am with my 4 band dipole and heavy duty mast (7m) combo. The mast/antenna system went up beautifully simply and I connected my new (to me - second hand) KX3 in a nearby farmer’s field for my first go. I enjoyed numerous QSOs on SSB on 20m, 40m and 80m all over Europe with 8 watts and never had a signal report lower than 5/8!! The whole set up worked magnificently. The wire winders worked a treat - ingenious design which does exactly what it says on the tin.
yes worked very well on 40 meters tried in a local park within 24 hours of receipt had 4 contacts interstate immediately on air 800 to 1200 kms
When used with the telescopic pole, I have great reception on all four bands. Made my first HF contacts with this setup. Used twice thus far, on a Kentucky ridge and in my backyard. The 4-band with pole even withstood a strong thunderstorm. SWR is skewed to the lower end of each band, but that is understandable as most will want to use this for CW. I use with a FT-818ND and a tuner, but the tuner isn't really necessary as the SWR is usually below 2 in the phone section of each band. I can also receive pretty well on 10m.
Just got this antenna couple of weeks ago. Very lightweight yet well built. Easy to deploy. Good SWR's so haven't needed a tuner. Easy to change bands. Deployed twice so far. Oncewith a 20' crappie pole for feed point. Another with a military fiberglass mast with FP @ 23'. Being an 80m wire antenna they do take up a bit of real estate. In an ARES environment sometimes you don't have that much space. I am going to see about changing the antenna on day to run paracord with the antenna to allow it to be erected in less space. Below is a youtube video of me using this antenna in a mock EmComm deployment running Winmor Winlink on 80m. Antenna in 'semi-NVIS' config. Setup was in a National Wildlife Refuge.
I got my band hopper a few months ago, and have done many successful activations with it. The build quality is good, and it is nice and light weight. The SWR is good over all the bands.
The only disadvantage is the size of the antenna once erected, it requires a large amount of space, which may not be available on certain summits. Other than that I've been very pleased
It’s simple, it works, and it’s light. With this great antenna there is one less thing you need to worry about organising for an activation.
Lost a couple of masts in a storm and decided to put up a temp aerial.
After using this don't think I need to erect any others!
Works well from my QTH and am enjoying good reports!
Thank you Richard.
So my review is based on my purchasing experience,delivery, and usage of my SOTA Beam.
The purchase was online,completely painfree.
I received my package containing my dual band SOTA Beam,extra guy setup and the 30'mast in record delivery time,phenominal !!!
The packaging was incredible,no damage to anything.
Setup is easy and effortless,and the quality and craftsmanship is great.
I was on vacation this past 4th of July week and set up Beam at the campsite and proceeded to make contacts to 10 countries and 6 of the 13 Colonies contacts.
Again,I cannot say enough about the SOTA Beam other than i'm about to purchase another...just to have a spare !!!
THANK YOU VERY MUCH FOLKS FOR A GREAT PRODUCT