USB Electronic Load to prevent power-bank low-current shut-down
USB battery packs are a convenient way of powering low power USB devices such as WSPRlite. Unfortunately many USB battery packs switch off (go into a sleep mode) if the current being drawn is too low. This means that your device works for a few minutes and then stops. Often just a few extra milliamps current draw will keep the battery pack alive. There are various circuits on the web that give a pulsed load which works with some battery packs - but unfortunately our tests have shown that such circuits don't work reliably with all battery packs.
Our solution is a variable electronic load. We have designed it to be very simple to use. Just plug it into your battery pack and increase the current until battery pack stays on reliably (6 - 150 mA). Depending on the current that your powered device takes that may be a little as a few milliamps. An on-board LED indicates if the battery pack is live. The load supports a standard USB data connection. USB plug and socket for easy in-line connection. Clear heat-shrink sleeving is provided to protect the unit in the field.
Available as an easy-to-make kit suitable for a beginner or fully built and tested. Note that the built unit is supplied encapsulated in clear heat-shrink sleeving.
Easy to use
To use, just plug the Keep-alive load between your battery and item to be powered and adjust the blue potentiometer on the unit with a fine screwdriver. Set it fully clockwise at first (maximum current) and gradually decrease the current until the battery pack just cuts out. Then increase the current until the battery pack stays on reliably. That way you only draw just enough current for reliable operation - increasing the life of your battery.
Instructions are available HERE!
Also available from our international agent(s):
18 Reviews Hide Reviews Show Reviews
Easy to build, works perfectly.
Sotabeams has useful equipment some of which are on my to-do list
Easy kit, I have a 4 amp cell phone charge pack that shuts off when powering the WISPRLite. This keeps it running with a minimum current drain.
Found it frustrating that battery packs would turn off at the low power draw of an Arduino. I found a circuit online, but I preferred not to build it. I was glad to see this product completely met my needs.
We are using this USB powerbank tool to have music and background sound on several locations in the woods combined with large powerbank and microSD speaker/player.
This is well worth buying if using a power pack.
Works great just as expected
This does exactly what it says on the box. It works perfectly I found it easy to build and I have very little soldering experience
Quality product, and works as intended.