Four-band portable dipole antenna system (Band Hopper IV)

¥11,408
(Inc. Tax)
¥9,506
(Ex. Tax)

NOTE Customers outside the Eu pay the lower (Ex. Tax) prices!

(31 reviews) Write a Review
SKU:
PDAS-400
Shipping:
Calculated at Checkout

The Band Hopper IV, four-band portable dipole antenna system

At a glance:

Bands 20m,30m,40m,80m

Weight 585 g, 21 oz.

Power rating 125 Watts

ATU needed? No. Connects direct to your radio

Balun included? Yes

SSB, CW, data? Yes. Fine for all modes

How long is this antenna? About 48 metres end to end.

***IMPORTANT NOTE: if you are using a Band Hopper with our 10m Compact Travel Mast, attach the antenna with a cable tie to the top of section 11 (counted from the bottom). This is about 20ft up and is the perfect height for the antenna centre. Any higher and the antenna may not work properly and your Compact Travel Mast could be damaged.***

What do you get?

Band Hoppers are a complete system including:

  • A resonant multi-band dipole antenna with Perspex link hardware
  • A 10m feeder - high quality RG174 terminated in a BNC plug
  • Built-in balun
  • A guying system for a lightweight telescopic pole (6 - 8 metres length recommended)
  • Three Wire Winders to ensure tangle-free operating
  • Three lightweight aluminium alloy pegs
  • A set of instructions
  • A nylon carry bag with peg pocket
  • Our famous back-up for any questions that you have.

Band Hoppers work out of the packet - no messing, just fun!

Is this the right antenna for YOU? Click here for help.

Instructions are available HERE!

___________________________________________________ 

Also available from our international agent(s): 

dx-engineering-reseller.pnglutz-electronics-reseller.jpghambuy-reseller-logo-2-.jpgchristech-reseller2.jpgtacticom-reseller-3-.png

 

Details

Designed to compliment modern miniature HF transceivers such as the Youkits HB1B or the Elecraft KX1, the Band Hopper IV covers 20, 30, 40 and 80 metres (3.5 - 3.7MHz 1.5:1 VSWR bandwidth using our "Hopper Jump" system)  in one neat package. Using all our innovative techniques and laser-cut hardware, the Band Hopper IV works straight out of the packet on all your favourite portable band. Full sized dipoles on each band means no-compromise performance. Not sure what a linked dipole is? Click here.

The Band Hopper IV covers four HF bands with a high efficiency full-size halfwave dipole on each band. It's not a compromise loaded antenna. It's also designed to allow you to get the feedpoint high - that's important for good performance. Band selection is by easy-to-use jumpers; quick to change!

Using the Band Hopper IV could not be easier. The custom designed centrepiece fits on an tapered pole (such as our famous SOTA pole). It slides down to the optimum height (usually the junction between the top and second sections of the mast).If you don't have a tapering mast dont worry, the centrepiece has slots for cable ties too so you can attach it to most anything. Don't like masts? The centrepiece has an attachment point for a throwing line to use in the forest.

 Unrolling the dipole elements is a breeze using the Wirewinders supplied. When you unroll the elements you will notice that the Wirewinders are attached to 4m (13ft) nylon braided extension cords. This not only means that you cannot lose them but also that in rocky areas you can guy your pole by putting the Wirewinder in a crack in the rocks or just by putting it under a rock. The Wirewinders also make great snow anchors too so guying your pole in the snow has never been easier! We also provide pegging loops for use with our high quality pegs (included).

The feeder is a 10m length of RG174 preterminated in a BNC plug. This is wound on a third Wirewinder. Also on the third Winder is a 10m back guy for your mast. No need for any additional guys and the two dipole elements plus the back guy are all you need for a stable and robust system. The back guy is attached to the Wirewinder to give you the flexible guying options above. Just a mast or use a nearby terr to support the centre of your antenna and you're good to go!

This Band Hopper IV is super light too! The whole package consisting of the antenna, the Wirewinders and the back guy weighs in at less than 475g; that's under 17oz!

No need to adjust the Band Hopper IV, it is supplied pre-tuned. We do the tricky stuff leaving you to have the fun. This is a fully assembled product that works out of the packet.

Each Band Hopper IV is supplied in a stylish carry bag complete with lightweight aluminium pegs.

The Band Hopper IV is a truly amazing package for a bargain price.

Balun

The Band Hopper IV is suppled with a high performance ferrite-core balun; not just a few turns of co-axial cable!

img-3509-1-.jpg

 

31 Reviews Hide Reviews Show Reviews

  • 5
    I Can Not Say Enough

    Posted by Al Manchester on 7th Jul 2017

    So my review is based on my purchasing experience,delivery, and usage of my SOTA Beam.
    The purchase was online,completely painfree.
    I received my package containing my dual band SOTA Beam,extra guy setup and the 30'mast in record delivery time,phenominal !!!
    The packaging was incredible,no damage to anything.
    Setup is easy and effortless,and the quality and craftsmanship is great.
    I was on vacation this past 4th of July week and set up Beam at the campsite and proceeded to make contacts to 10 countries and 6 of the 13 Colonies contacts.
    Again,I cannot say enough about the SOTA Beam other than i'm about to purchase another...just to have a spare !!!
    THANK YOU VERY MUCH FOLKS FOR A GREAT PRODUCT
    AL MANCHESTER

  • 5
    2 Years and 100+ Activations

    Posted by Rob VK4FFAB on 1st May 2017

    The 80->20 linked dipole is almost indestructible. Over the last 2 years I have use this antenna portable doing Sota and WWFF activation's, base camping at the beach and just about everywhere in between.

    It has been used and abused and not looked after, its fallen over, been stepped on, tripped over and dropped and its never failed me, until my last trip away when I broke the dipole center. Yes, I broke it, it was not anyone else fault but my own.

    So i emailed Richard to BUY yes BUY another center because lets face it after 2 years of abuse its warranty has run out HIHI and Richard offers to send me a replacement free with my next order. Cannot complain about that, I wanted the switched inductor kit anyway to make a L Match tuner so order made, free parts coming and I am back in business for another 2 years or more before i break it again.

  • 5
    Brilliant and so well made !!!

    Posted by John Haddleton on 1st Apr 2017

    Thanks Richard for excellent service and a great antenna to use with my Elecraft KX2 doing /P .

    I have, however made a couple of mods to it that I think are worthwhile.... The Bandhopper IV is now a 'V' as I have cut the dipole at the 60M point, and used the 'freebie' bits you sent to accomplish this.

    Beyond this, as I quite often operate in poor weather, I have changed all the connectors to Anderson Power Poles, which I think give a more satisfactory connection than the Croc Clips.

    Its always a pleasure doing business with you..., and I love my WSPR Lite and Power Conditioner too. Thank you !!

    73 de John M0OBU .... http://m0obu.net

  • 5
    Outstanding Antenna For Portable Work

    Posted by Gary Mayell on 13th Mar 2016

    hi Richard,
    i am speechless with the level of dispatch-delivery fantastic work, i have been using the Bandhopper IV for a couple of days now with a yaesu 817 at 5 watts, my QTH is between London and Southend On Sea on the Essex coast, some of the contacts i have had are from Bulgaria,Germany and the best 1 me and friend of mine which he contacted was into South Africa.

    Many Thanks Richard for the hard work you have done putting these antenna's together

    hope to shop with you soon and 73's

  • 5
    Nice lightweight linked dipole

    Posted by Jan Timmers on 7th Mar 2016

    I've recently started using this linked dipole. I use a SpiderPole fiberglass mast, and push the apex of the dipole up to about 30' high (9m roughly), then run each leg of the dipole down to the ground using the supplied aluminum pins (or any convenient thing if it's where the guy ropes end up down near the ground). So I've really only used this in an inverted V configuration, and it works very well for me. I'm using this with an Elecraft KX3, usually less than its full 15w power output - in most cases it's about 5 watts to conserve battery - I use this setup for portable operation, as my home is located in a neighbourhood with antenna (and other) restrictions. Luckily I'm only 10 minutes walk from a really desireable location in a local park on the beach of a beautiful lake - VE7JBT

  • 5
    Piece of Cake

    Posted by Steve on 8th Feb 2016

    Talk about easy, put up on a 6 metre pole plugged it in and first call out of the bag was london to cornwall on 80m

  • 5
    Performs as advertised

    Posted by Dudley / KM4IYQ on 18th Aug 2015

    Great performance in a very light weight portable package!

    It fits great inside my backpack and deploys easily and quickly. A great companion for my KX3. I have enjoyed many QRP contacts around the USA and Canada and take it with me everywhere I go for portable Ops.

  • 5
    BandHopper 4 used on Museum on the Air

    Posted by Mervyn/G4KLE on 22nd Jun 2015

    Hi Richard, I have to give your BandHopper IV a review as I used it this weekend as part of my station setup for GB2NM "Museum on the Air" at the Norris Museum, St Ives in Cambridgeshire. My other operators were a little skeptical to its operation as it looked a little flimsy (that was their words, not mine). After set up we were on the air at 08:15Z to a station in Yorkshire who gave us 59+10db. Conditions were not brilliant on 40m throught out the day, but we managed to work over 60 stations (G's, GI's, GW's, DK's and PA's), I can confirm that most were in the RST 58 & 59's with a large number giving us 59+10 and 20db. The station was my KX3 with KXPA100, using 50 watts. What a great Antenna for /P and Special Events.

  • 5
    Very happy

    Posted by M0LMK on 30th May 2015

    A great antenna for a good price. Well made and easy to get up in the air. I use mine with a 12M push up mast and ended up making the guy lines a little longer to account for the extra height. Overall a great, lightweight, multi band resonant antenna ideal for ARPOC activations.