Replacement sections for 10m SOTAPOLE

€9.60
(Inc. Tax)
€8.00
(Ex. Tax)

Customers outside the UK pay the lower (Ex. Tax) prices when ordering. However, some countries require you to pay tax on imported parcels. Details here.

(No reviews yet) Write a Review
SKU:
RSSP-100
Availability:
Only ships to UK
Maximum Purchase:
3 units
Shipping:
Free Shipping
Bulk Pricing:
Buy in bulk and save

Replacement sections for the 10m SOTAPOLE Telescopic Antenna Mast

The price of these replacement sections is per section, and includes delivery. The price will decrease if ordering multiple sections. They are sent by Evri, and can only be sent to the UK.

These sections are only for the current model of 10m SOTAPOLE, which has "WHIP 10000" printed on the bottom section. We do not currently stock replacement sections for 7m SOTAPOLES, we only stock them for 10m SOTAPOLES.

When ordering, please provide details of the replacement sections that you need. The diameters of individual sections have varied a bit between batches of poles, so to make sure that the replacement sections will fit your pole, we need to know sizes at the points where they lock with the rest of the pole. Specifically, we need:

  • The outside diameter at the bottom of the broken section (not needed if it is section 1, the bottom section).
  • The inside diameter at the top of the broken section (not needed if it is section 10, the top section).

If the section is too damaged to be able to measure a diameter, please measure the part which that end needs to lock with. For example, if the outside bottom diameter of a broken section 3 cannot be measured, please measure the inside top diameter of section 2.

If adjacent replacement sections are needed, we only need measurements for where they will join the rest of the pole. For example, if sections 3 and 4 are needed, only the bottom of the old section 3 and top of the old section 4 need to be measured.

Digital calipers (if you have them) are the best way to measure pole diameters, but you may be able to get a reasonably good measurement with a ruler or tape measure too.

The outside bottom diameter should be measured at the wider (machined) end:
img-20210112-155852588.jpg

img-20210112-155919840.jpg