Easy tuning dongle for the FT-817, FT-897, FT857
If you use an FT-817, 857 or 897 with an antenna tuner you will have noticed the lack of any straightforward way to send a carrier for tuning. To do so requires you to change the mode. Given the slightly clunky user interface on these radios, sending a tone can require several key presses. It's annoying in the shack and can be very frustrating in the field. This is all the more of a problem if you use a narrow-band antenna such as a magnetic lop that needs frequent re-tuning.
The Click2Tune makes the tuning process so much easier! It's a tiny dongle containing a sophisticated microprocessor that plugs into the the back of your radio. Once set up, tuning just requires a double click of the microphone PTT switch to send a carrier; that's all. Brilliant!
With the 857 and 897 you might wish to carry out tuning at low power, the Click2Tune does this too by allowing you to select the tuning mode. That allows you to tune at 25 Watts - this is especially important for protecting auto-tuners. By the way, the same Click2Tune dongle can be used on all of the radios above, you don't need different types.
The Click2Tune is a really useful accessory that is sure to make your mobile and portable operating easier!
Also available from:
12 Reviews Hide Reviews Show Reviews
Plugged into the FT-857. Switched on the Rig and it just worked.
It's a brilliant little device that provides an easy solution by providing a carrier to tune for a fully automated process.
Worked straight out of the box on my FT817. I didn't bother changing any of the default settings so it actually took longer to read the instructions than it did to install and start using!
Put simply, this little device works like a charm!
Its one of those bolt on items that you quickly learn you can't live without - particularity if you are constantly changing and experimenting with wire antennas as I am!
I use mine with my FT817 and set it up in the low power mode (AM) as per Richard's online instructions. This triggered a tuning carrier of around 3 watts instead of the normal 5 watts using the default PSK setting. I delved into the 817 extended memory and reduced my AM carrier power to 2 watts further taking the pressure of my finals during tune up. I use an Elecraft T1 ATU and sometimes my ZM-2 - both of which tune my antennas no problem whatsoever at this power level.
I don't own any of the other Yaesu rigs to comment on how this device works with them but if the 817 is anything to go by, you shouldn't have any difficulties.
A great bit of kit you I guarantee wont regret purchasing!