Drive-on Car Stand for masts (Sleeve)

(Inc. Tax)
(Ex. Tax)

Customers outside the UK pay the lower (Ex. Tax) prices when ordering. However, some countries require you to pay tax on imported parcels. Details here.

(15 reviews) Write a Review
Calculated at Checkout

Drive-on mast stand

Note: this stand is not suitable for our Tactical 7000hds (too wide for the sleeve, except if the bottom section of the mast is removed), or the Mini Telescopic Pole 4.1m or the Carbon-6 (too slim). Please see here for an alternative style of drive-on stand suitable for slimmer masts.

This drive-on stand makes operating from your car really easy. Just drive the wheel of your car onto the base-plate and insert your mast into the steel sleeve. You're on the air in minutes! Perfect for operating from near the beach or from local high-points. Add one of our popular Travel Masts for a great portable set-up that you can keep in your car ready for any operating opportunity. A handy accessory for the well-equipped emergency communicator too! Our drive-on stand for masts is suitable for use with SOTAPOLES (7m and 10m), Tactical Mini compact 6m and the Compact Travel Mast.

Video: Drive-on Stand for Antenna Masts


Product Details:

Made of mild steel with a light grey painted finish it will give many years of service. Great with aluminium poles up to 58mm diameter. Quick and easy to assemble and take apart for transport, the stand separates into two parts.

Sleeve dimensions: I/D=60mm O/D=63.7mm L=400mm

Base 40cm x 15.2cm

Weight 2.5 kg.

Recommended maximum pole height 10 m (telescopic fibreglass mast).

Guying recommended in windy conditions or when using antennas that exert a significant "pull".

For some slimmer masts you will need to pad out the sleeve to get a good fit. 


Also available from our international agent:- 


15 Reviews Hide Reviews Show Reviews

  • 5

    Posted by 2E0HWO, Howard on 7th Feb 2020

    Robust piece of kit which (with a little care and some grease) screws together and apart rapidly to make it easy to fit in the boot. I need to fill the gap around the mast for my Buddipole aluminium 7m telescopic and came up with the idea of using a car part to tightly fill the space - Autohoses 51mm - 38mm ID Red Silicone Straight Reducing Hoses X 2. Your diameter will vary! Fast and easy to deploy.

  • 5
    I love it!!!

    Posted by N5EIT on 3rd Jul 2019

    I’m an amateur radio operator living in the USA. I’m also a portable QRP enthusiast. I found sotabeams several years ago and look to them in many instances when needing quality gear for my operations. I spend over 6 months a year in the backcountry with my radio gear. I’ve always had great experiences with their equipment. This drive on stand is no different. I can set up my portable station quickly and easily with this stand when camping in my truck. I recently set up with the 10m mast and an Elecraft Kx2 running a 25’ vertical and several 25’ counterpoise wires. I can work all the bands I need with this setup. I’m happy to say that I’ll be a sotabeams shopper for many moons to come.

  • 5
    Great piece of kit

    Posted by Alan on 27th Jul 2018

    Very good for mobile use

  • 5
    A bit pricey, but well worth it

    Posted by Dom Wilkinson (2E0WHQ) on 9th May 2018

    I finally got around to using my drive-on mast support. It's quick and easy to assemble, although I was slightly concerned with the fine threading on the tube and thought it might be easy to cross-thread if you're a bit clumsy; however I just take my time and it goes together just fine. Under the wheel of my Toyota Land Cruiser the mast was perfectly solid with my 8m mast with a 40m inverted 'V' mounted on it. My mast was slightly 'sloppy' in the socket, but that was a simple fix, just pop an old t-shirt or towel over the top of the tube before you push your smaller mast down in to it and that holds it firmly with the added protection of some padding around your fibreglass mast. I've also tried it holding up a 10-Element 70cm Yagi on my 8m mast and there was no movement from the base of the stand, so it's perfectly usable in light wind conditions. Now thinking of buying a second one!

  • 3
    Bit flimsy

    Posted by Unknown on 26th Aug 2017

    Problem I found was that the base flexes when i use a 12m spider pole. it's not rigid enough. it needs to have some angle iron type fixings to make the thing riigid. I would not be confident putting my mast up in anything other than a light breeze.

  • 5
    great drive on mast

    Posted by on 3rd May 2017

    Excellent product, fits my 60mm mast perfectly snug, my only fault with it is , very fine threads where screws together, I didn't have mast guyed in gentle breeze at 4mtr, rocking motion damaged thread, however I had it welded so pieces fixed together now

  • 5

    Posted by James on 21st Mar 2017

    Seemed comfortable with my fibreglass Spiderpole 12m in a 'Moderate Breeze' (Beaufort 4, 15mph) with no guying.

  • 5
    Toppie !

    Posted by Danny Van Tricht on 3rd Jan 2017

    Good product. 73 Danny ON4VT

  • 5
    Very nice

    Posted by HB3YVW on 13th Dec 2016

    Very solid builded, looks good, works good, too heavy for SOTA but perfect for car based activities. Hild a 10m beam without further support.

  • 5
    Perfect Size for 10 Meter Pole

    Posted by Steve on 30th Aug 2016

    Judging from the photos and dimensions, this doesn't seem like it would be enough to hold a 2.26 Kilogram fiberglass pole. Boy was I wrong. Once this is anchored by the car's tire, it is solid. Since the base of my pole was a little smaller than the vertical tube, I wrapped a cloth around the pole and slid it in. It made a nice sturdy fit with no stress on the fiberglass section. This is great for a quick set up in a local park or for testing new antennas in my driveway.