Carbon-6 ultra-light 6 m (19.6 ft) mast

£44.95
(Inc. Tax)
£37.46
(Ex. Tax)

NOTE Customers outside the UK & EU pay the lower (Ex. Tax) prices!

(3 reviews) Write a Review
SKU:
CCBM-100
Availability:
This mast ships Worldwide
Shipping:
Calculated at Checkout

 The 'Carbon-6' Compact ultra-light 6 metre telescopic mast

 ***New - read my blog post on carbon masts here***

Carbon-fibre has an unmatched strength to weight ratio, which is why it is used on all modern passenger aircraft. The Carbon-6 leverages this characteristic to your advantage!

  • Small enough to fit in a rucksack
  • Tall enough to support your antenna
  • Super-lightweight carbon-fibre construction
  • Amazingly strong considering its light weight and length
  • Made specifically for SOTABEAMS
  • The perfect light-duty mast

Ultra-lightweight portable operators need something special to support their antennas. The new Carbon-6 has been designed for exactly this role.

  • Super short packed length for easy transport in a rucksack
  • Amazingly light - so light that you can take it "just in case"
  • Fits easily in aircraft carry-on baggage (always check before flying!)
  • Telescopic - perfect for rapid deployment
  • Black carry bag with tie-string
  • Carbon-fibre construction (measured loss < 0.1dB).
  • Screw-on base cap allows field repairs and section swap-outs

An optional extra is our Mini Pole Stake Kit which makes your Carbon-6 even easier to use!

"Every ultra-lightweight portable specialist needs a Carbon-6 in their go-pack"

Notes: The Carbon-6 has been manufactured specifically for SOTABEAMS. Carbon fibre masts are slightly conductive and so extra care must be taken when using them near power-lines. These masts are suitable for supporting lightweight horizontal antennas or inverted vees and vertical antenna. Because of their flexibility, we recommend a maximum antenna height of 5 metres (15 ft). We do not recommend using these masts for supporting the centre of dipoles (with feeders) due to the weight of such an arrangement. They are perfect for supporting lightweight end-fed wire antennas.

Since the Carbon-6 is quite flexible near the top, anything except a vertical antenna is best attached a couple of sections down rather than at the very tip.

Friction lock: pull each section firmly with a twisting motion for best lock. When erecting always start with the smallest section. When taking down always start with the largest section.

Mast sections may be removed by unscrewing the endcap at the bottom of the mast and removing unwanted sections.

 Also available from our international agent(s):

 dx-engineering-reseller.pngwimo-de-agent-logo.png

 

Detailed Specifications:

Extended length: 6 metres (19.6 ft). Lengths approximate - click here to find out more.

Packed length: 43 cm (17 inches)

Number of sections: 18

Wall thickness: 1 mm (0.04 inches) bottom

Weight:  300 g (10.6 Oz.)

Mast Material: carbon fibre

Tube diameter: top 2.4 mm, base 31 mm (1.2 inches)

Base cap diameter: 32 mm (1.25 inches)

Tube colour: white (base), black (other sections)

Supplied with black carry bag with tie-string

FAQ

Will a carbon mast attenuate my signal?

Not in any significant way! The worst-case loss for the Carbon-6 is less than 0.1dB (measured with a coil wound around the mast).

Will a Carbon-6 mast support my Band Hopper antenna?

No. The Carbon-6 mast is best used with lightweight endfed antennas. For Band Hoppers we recommend the Tactical 7000hds (BH 2+3+4), Tactical Mini (BH 2+3) or Travel Mast (BH 2+3+4)

Is there a guying kit for the Carbon-6?

No, sorry, we don't currently have a guying kit designed for the Carbon-6 mast.

However, items which might be useful include:

  • Guying ring, 14.4mm inner diameter - sits about halfway up the mast.
  • Tactical guying ring, 22mm inner diameter - will sit about 1.35m up.
  • Versatile top insulators. Using the small hole, sits at the base of the 3rd section from the top, approx 100cm from the top. Using the large hole, sits at the base of the 4th section from the top, approx 135cm from the top.
  • Tactical top insulators. Using the small hole, sits at the base of the 2nd section from the top, approx 66cm from the top. Using the large hole, sits at the base of the 4th section from the top, approx 135cm from the top.
  • Aluminium pegs, cord, wire winder, antenna bag.

The Mini Pole Stake Kit works with the Carbon-6.

The GK7 guying kit is not suitable for the Carbon-6, as the Carbon-6 is much slimmer than the GK7 is designed for. The guying ring in the GK7 kit would sit only one section from the bottom of the Carbon-6, about 43cm from the ground - not very useful!

 

___________________

All dimensions approximate.

 

3 Reviews Hide Reviews Show Reviews

  • 5
    CARBON-6 ULTRA-LIGHT 6 M (19.6 FT) MAST

    Posted by Norman Elliot on 5th Feb 2020

    Bought this after seeing Richard&#039;s review on Youtube. Well pleased with purchase.

  • 3
    A bit disappointing

    Posted by Alan on 26th Jan 2020

    My other two small masts are better.
    I took the top two pieces off of this carbon 6 mast and it&#039;s a lot better as the top two were very week.

    [Admin: Thank you taking the time to post a review. I was pleased to hear that you have found a good way to use your Carbon-6 mast. Lightweight masts such as the Carbon-6 are less robust than our heavier masts so they do demand a slightly different approach to get the best out of them.]

  • 5
    Carbon-6 ultra-light 6 m (19.6 ft) mast

    Posted by Phil Sandell on 31st Dec 2019

    Fits easily into a rucksack, very light and easy to erect. Stays up well in wind, no more mast collapses. Excellent product