PowerPole® PP 4-Way

£7.50 - £24.95 (Inc. Tax)
£6.25 - £20.79 (Ex. Tax)

Customers outside the UK pay the lower (Ex. Tax) prices when ordering. However, some countries require you to pay tax on imported parcels. Details here.

(41 reviews) Write a Review
Calculated at Checkout

PowerPole® 4-Way Connector Box


Video: PowerPole 4-way

PowerPole® connectors are the best way to distribute DC in your shack or in the field. Once you start using them, the urge to convert all your DC distribution to them becomes inevitable. Our PowerPole® connector box is rated at 25 Amps. PowerPole® connectors are impossible to connect the wrong way round; reliable and easy to use.

The SOTABEAMS PowerPole® 4-way makes light work of connecting four things together. For example, four PowerPole® connectors allow you to connect a radio and amplifier to your battery while leaving one socket free for another accessory. Naturally we have designed the PP 4-Way to be light and rugged too.

Speaking of design, the PP 4-Way is rated at 25 Amps; no mean feat for a PCB design. To make sure the resistance is low, the PCB uses double weight (2oz) copper, ultrawide traces on both sides of the board, and plated through vias to ensure an even current distribution between each face of the board. This is a unit built to a high specification!

The PP 4-Way uses genuine Andersen PCB contacts too for lower contact resistance and improved reliability.

The PP 4-Way is available in three forms:

  • The PCB kit consists of: 1 x PCB, 8 x PCB contacts, 4 x red connector shells, 4 x black connector shells.
  • The PCB + enclosure kit adds an ABS box, laser-cut front panel and board mounting hardware.
  • Alternatively you can buy the PP 4-Way ready-built and tested.

Dont forget to order a bargain pack of connectors!


25 Amp rated on adjacent sockets (30 A surge)

Weight 58 g

W55 L83 H28 (Height excludes connectors)

Download the instructions here... 

Also available from our international agent(s):  



41 Reviews Hide Reviews Show Reviews

  • 5
    PowerPole® PP 4-Way

    Posted by Tristan on 14th May 2020

    I brought one of these in preparation to going portable. I wanted a way to distribute the power to the kit I'm taking out with me. The construction is study and the powerpoles have no problems mating with any other powerpole connector I use with them. Effective and simple to use, which is just what I needed.

  • 5
    Powerpole PP4 Way

    Posted by Ken Porter on 6th Mar 2020

    A very nice bit of equipment for the shack or when out portable, Plus the normal impeccable service from Sotabeams

  • 5
    Powerpole 4 way DC distribution box

    Posted by Bernard Rhead on 20th Dec 2019

    I have used this product to distribute DC power to my QRP rigs and Bias Tee. Neat, simple solution - happy!

  • 5
    PCB Assembly and complete build

    Posted by MARTIN BLAIN on 14th Nov 2019

    This a professional and very neat power distribution system for the Ham. Very suitable for SOTA operation as it is so light and reduces the risk of power inversion.

  • 5
    Very happy

    Posted by Paul Offord on 16th Oct 2019

    Easy construction and neat result.

  • 5
    PowerPole 4 Way

    Posted by Howard on 15th Aug 2019

    Perfectly portable Power Poles. Power distribution made easy.!

  • 5
    PowerPole 4-Way Connector Box

    Posted by Philip Sandell G4HQB on 27th Jun 2019

    Works very well, light and small so no extra sota burden. I use it for and 817 and 40w hf power amp. No problems at all with this unit

  • 5
    Powerpole 4 way DC distribution box

    Posted by Bob Hammond G4DBW on 28th Mar 2019

    Great little kit. Clear instructions on the website make this easy to assemble in under 30 minutes. I modified my unit drilled a hole to take a dc cable into the side of the box and gives me 4 power poles for distributing DC power around the shack.

  • 4

    Posted by Terry Martin on 1st Feb 2019

    Great product but would benefit from a single input fuse holder. Solidly engineered and ideal for those /P operations.

  • 5
    Tidying up dc connections

    Posted by Steve Down G3USE on 20th Dec 2018

    In the past I have used dedicated PSU's with each transceiver using spade connectors. In my latest, smaller, shack I am using only one power source. This product is the ideal way to connect the 2 main multiband transceivers, covering 160-70 and another fm unit. Individual connections can be made or removed easily without affecting the others.