HF Antenna Traps Kit (pair)

¥1,563
(Inc. Tax)
¥1,301
(Ex. Tax)

NOTE Customers outside the Eu pay the lower (Ex. Tax) prices!

(19 reviews) Write a Review
SKU:
HFAT-102
Shipping:
Calculated at Checkout

HF Antenna Traps V3.0 (sold in packs of two)

Make your single-band antenna into a multibander with our lightweight antenna traps

We like to think that our new HF trap kits are a rather clever design. Their flexible mounting arrangement makes using them so easy!

SOTABEAM traps come in two power levels, 20 Watts and 100 Watts (see our tiny PICO TRAPS for 10 Watts). Each kit includes two (2) traps. 

You decide on the frequency when you build them; recommended range 7 - 25 MHz. Alignment can easily be done using an antenna analyser if you don't have access to other test equipment.

Using Traps

Traps can be used in two ways:

1) By using a trap resonant on the higher frequency that you want your antenna to work on, traps work as an effective isolator. In this application, the trap needs to be resonated in the band. This configuration makes the antenna easy to adjust as the sections do not interact much. In this configuration, our traps show a loss of typically < 0.7 dB.

2) By using a trap resonant between the two bands that you want to use (typically 1 to 2 % percent below the band edge of the higher band), losses are reduced but adjusting the antenna is much more difficult as the two sections interact. In this configuration our traps show a loss of typically < 0.3dB.

We recommend that you resonate your traps at the lowest edge of the band that the trap is to work at. So for a 20m-40m dipole, resonant your trap at 14.0 MHz. This tends to be a resonable compromise between trap loss and ease of antenna adjustment.

Our traps can be used either way, it's your choice.

This article gives some useful tips on using antenna traps.

W8JI is an authority on all aspects of antenna design - including traps.

trap-mounting.jpg

What's included in a SOTABEAMS Trap kit?

2 x high quality trap PCBs with plated through holes

4 x 100pF 1kv capacitors (used in series or parallel to give 50pF, 100pF and 200pF options)

2 x mounting hardware for toroids

2 x toroids (T94-6 for 100W and a lighter T68-6 toroid  for 20W)

Enamelled copper wire to suit the power level

Downloadable instructions

We recommend our Liquid Electrical Tape for final waterproofing of your traps.

Specification

PCB Length 66mm Width 30 mm

Loss < 0.3 dB

Impedance ar resonance typically 20,000 Ohms

Weights: 20 W traps 10.6g (0.4 oz.), 100 W traps 16g (0.6 oz.)

Other options

Our HF Traps are also available built - click here.

For even smaller traps see our NEW PICO TRAPS 

Also available from our international agent(s):  

tacticom-reseller-3-.pngradio-parts-japan-agent-logo-1-.png

 

 

 

 

19 Reviews Hide Reviews Show Reviews

  • 4
    HF Antenna Traps

    Posted by Keith Hamlyn on 2nd Oct 2019

    They worked well and were comparatively easy to make. Only issue was having to solder two capacitors in parallel with only one pair of holes. Next pair, I will substitute one capacitor only for 40M.

    [Admin: Thanks for your good review. You can, of course, substitute your own capacitors. Make sure they are proper RF ones such as silver mica. Cheap high voltage ceramic caps will not work in this application.]

  • 5
    HF Traps Kit for 40/80m

    Posted by Roger on 26th Sep 2019

    Easily assembled and fun to test. Both bands showed very low SWR.

  • 5
    Easy to build works fine! by SV2HSZ

    Posted by Michalis Sirkos on 20th Jan 2019

    i am really impressed for this kit of 100w traps i made test with my analyser and find realy response to the frequency tnx i think is Value for money this choice no tunner anymore!!!

  • 5
    Excellent HF traps

    Posted by Ignacio EA2BD on 15th Oct 2018

    I purchased these traps to prepare an antenna for field day. Components and building instructions are excellent, easy to build and meet my expectations. Thanks for these great parts not available elsewhere... 73 de Ignacio

  • 4
    Traps

    Posted by Jim Sloane on 13th Sep 2018

    Very simple and easy to tune

  • 5
    HF Antenna traps kit

    Posted by John, G3UCQ on 5th Sep 2018

    Construction was easy and using my antenna analyser got the traps resonant on 14.0Mhz for a 40/20m dipole.
    After some juggling with the wire lengths the antenna gave me 1:5.1 on 40 and 20m and it works well with my QRP rig. Good purchase.

  • 5
    HF antenna traps kit

    Posted by LA3II on 2nd Aug 2018

    Smart design, lightweight, easy to make trap dipole.

  • 5
    HF Traps

    Posted by Ian on 20th Jun 2018

    Easy to assemble, but had to take off a turn on the
    toroid from the suggested in instructions. Used an antenna analyser AA-54 to tune the traps, this worked well.

  • 4
    Traps

    Posted by Dave G7OPC on 22nd Apr 2018

    I purchased the 100 watt version traps to build a 40/20/17m vertical antenna. Easy to construct with good quality parts. Getting the . correct trap frequency for 20m and 17m was a bit tricky - otherwise I would give it a 5*. Was a few 100 kHz lower than 14.0 and 18.0 MHz causing some interaction on the antenna. But it all worked out OK with a successfully built antenna. I would happily buy these kits again and recommend them. For the size, weight and overall quality, it would be hard to beat.